Tactical Steps That Must Be Followed to Change a Flat Tire

During a tire changing job, tactical steps must be followed to maximum safety. If you tackle a job properly prepared, you'll get your car back on the road without any hassle.

Since a car can roll while it's propped up, you must pick a practical place to change a flat tire. If possible, try to avoid a grassy terrain or an area that has dirt because you'll have to deal with stability problems in these locations. An ideal spot that can support a jack and a vehicle should be solid and level.

Before lifting the car with your jack, open the door to the cabin and activate the emergency brake. This particular brake will stop the tires from rolling after you elevate the vehicle in the air with the jack.

When you're ready to replace the tire, grab the lug wrench, loosen the nuts, and remove the tire. Then, mount the spare in place and tighten the nuts with the wrench.

Categories: Social

Comments

Nothing posted yet.